Suprema BioEntry R2 BER2-OD Compact Fingerprint Reader RFID card Access Control

Description

New Suprema BioEntry R2 Compact Fingerprint Reader RFID card Access Control BER2-OD
Suprema BioEntry R2 is a compact fingerprint reader exclusively designed for centralized access control systems.
Packed in a slim, mullion-type design, BioEntry R2 provides high-definition fingerprint image capture, minutiae
extraction as well as dual-frequency multi RF card reading capability. Combined with Suprema’s intelligent biometric
controller, the CoreStation, BioEntry R2 completes biometrics-driven access control system with enhanced simplicity
and level of security of centralized system topology.
Standardized Communications
Open Supervised Device Protocol (OSDP)
Combined with Suprema’s intelligent biometric controller, the CoreStation, BioEntry R2 completes biometrics-driven access control system with enhanced simplicity and level of security of centralized system topology.
Communicates with SmartPhones
With BioStar 2 Mobile card, as a credential, your smartphone is a key to access.
Mullion-type Design
With its 50mm width, BioEtnry R2 perfectly fits in its narrow spaces and door frames.
Dual Frequency, Multi-Smartcard Reader
Featuring dual-frequency RFID card technology, BioEntry R2 supports both LF(125KHz) and HF(13.56MHz) RFID including all RFID card standards.
On top of fingerprint credential, BioEntry R2 supports most types of RFID card standards with a single device including MIFARE, DESFire, FeliCa, EM and NFC.
Specification
Credential
Biometric
Fingerprint
RF Option
BER2-OD: 125kHz EM & 13.56MHz MIFARE, MIFARE Plus, DESFire/EV1, FeliCa, NFC
RF read range
*
MIFARE/DESFire/EM/iCLASS: 50 mm, Felica: 30 mm
* RF read range will vary depending on the installation environment.
Hardware
LED
Multi-color
Sound
Multi-tone Buzzer
Operating temperature
-20°C ~ 50°C
Operating humidity
0% ~ 80%, non-condensing
Dimension (W x H x D)
50 mm x 164 mm x 37.5 mm
Weight
Device: 158 g
Bracket: 39 g (Including washer and bolt)
Certificates
CE, FCC, KC, RoHS, REACH, WEEE
Interface
RS-485
1ch Slave
Tamper
Supported
SALES POLICY
Payment
- We accept PayPaL only.
Shipping
- All the orders will be shipped out within 1～3 days after payment has been cleared.
- EMS is 3 to 7 business days
Sometimes it takes a little longer due to holiday, local dispatch delay or other reasons.
- Holidays are excluded from the Shipping days.
- Worldwide FREE shipping by EMS.
- If we need to ship it via DHL or EMS Premium.
There will be an extra shipping charge of around 30$ - 100$.
Therefore please send us an email before purchasing it. Additional shipping charge required.
- We only ship to the shipped address as shown on ebay order detail.
Return Policy
- We carefully inspect the item before shipment.
- We guarantee and is not as described, defect then you may return the item for exchange.
- Item must be returned within 30 days to the our address on the package (Unused / undamaged)
- Except our mistake return shipping cost will be paid by buyer
Contact us
- Your satisfaction is our goal.
- If you are not satisfied please contact us at immediately to sort out the issue before leaving Negative or
Neutral feedback and we will do our best to resolve your concern.
- Please give us a feedback regarding our product and service
Note
- We are not responsible if any taxes or customs duties occurred at you.
ends import duties, taxes, and charges are not included in item price or shipping cost.
These charges are the buyer's responsibility.
- Even though it's buyer's fault.we will try to help you handle this at the lowest cost.
Powered by
eBay Turbo Lister
The free listing tool. List your items fast and easy and manage your active items.