Oscilloscope DC/AC Current Probe Range 50mA-100A Peak Bandwidth -3dB 100KHz BNC

Description

Note: we'll ship this item via
express mail service
to USA, Canada, Australia, New Zealand, Ireland, Austria, Belgium, Denmark, Germany, France, Finland, Luxemburg, Malta, Norway, Sweden, Swiss, Spain, Italy, UK, Japan, Korea,Thailand, Malaysia, Indonesia, Philippine, Singapore.
Clients from other countries pls contact with us in advance to confirm the different shipping charges before you order.
1. Frequency range (-3dB)DC-100KHz
2. The load impedance >=1MΩ and <=100pF
3. Insert impedance 0.01Ω
4. The maximum operating voltage 600Vrms
5. Battery 9V alkaline battery (
not included
)
It is a high performance current probe a capable of simultaneous measurement of DC and AC.
Measurement of current is from 50mA to 100A peak, the bandwidth reaches 100KHz (-3dB).
Two range switching (10A file and 100A file), convenient switching low current and high current measurement.
With the power indicator light and overload indication lamp, and the use of battery power, makes the measurement more convenient.
BNC output interface, convenient connection and oscilloscope and other equipment.
Usually used for frequency measurement, motor drive, power supply, avionics etc.
Electrical specifications:
Measuring conditions: 23
C
+-
5
C
, 20-75%RH, with conductor central in the loop.
Range
50mA~10A Peak
1A~100A Peak
Current Transfer Ratio
100mV/A
10mV/A
Amplitude accuracy
3%±5mV
500m-40A Peak
：
4%±500uV; 40-100A Peak: see Fig.2
BW(-3dB)
DC-100KHz (see Fig.3)
Phase shift
DC-65Hz: <1.5°
DC-65Hz: <1°
Phase shift characteristic
see Fig.4
Load impedance
≥1MΩ and ≤100pF
Input impedance
0.01Ω
Noise
6mV
600μV
Slew rate
0
.
3V/uS
20mV/us
Rise time
<3.5us
<3.5us
Transient response
see Fig.5
Square-wave response
see Fig.6(50Hz/200mA); see Fig.7(1KHz/200mA); see Fig.8(10KHz/200mA)
Continuous maximum input range
see Fig.9
Max. rated voltage
to earth
600Vrms
Battery
9V(NEDA 1604A,IEC 6LR61),
not included
Low battery indicator
>6.5V ,LED Green
Overload indicator
Red LED indicator measuring the current is overload. Change the range.