ACCESS inBIO460 Four-Door Controller tcp ip electronical door access control

Description

Packing:
1 set Inbio 460 Access Controller ;
1 PC Software/Manual Disk;
INBIO-460 IP BASED ACCESS CONTROL PANEL
InBio carries out the matching of fingerprints on the panels. The FR Series of readers transmit fingerprint templates to InBio via RS-485 for fast and accurate matching with templates stored in a data-base. InBio controllers install easily on your network and support both TCP/IP and RS-485 communication. Auto-discovery tool allows setting and modication of network parameters directly and easily.
InBio controller firmware can be upgraded in the field.Stores up to 3,000 fingerprint templates, 30,000 card users, and up to 100,000 events and transactions. Controller is backed up in real-time in on-board SD card. Data is preserved if power is lost. InBio continues to opperate if network connection is interrupted. Along with relay contacts for controlling door locks, easily programmable auxilary relays can be used for additional control and interface to lights, alarms, annunciators, intrusion detection panels, or even extra locking devices or gate controllers.
InBio controllers come in three sizes to suit project needs and reduce the cost of unused capacity. 1-door, 2-door, and 4-door models can be mixed and matched in an optimized system architecture. Anti-Passback, First-Card Opening, Multi-Card Opening, Duress Password Entry, and Auxilary Input/Output Linkages are built into controller firmware.
Free SDK is available for integrators and OEM’s to integrate the InBio controllers with their or existing security or personnel management applications. Upon request, ZK can also customize InBio firmware to meet any custom requirements.
Features
Over-current protection, over-voltage protection, and reversal protection for the power supply and all of the input and output terminals
Reliable network system of controllers using either TCP/IP or RS-485 Serial communication
Supports different Wiegand formats, and connects to ZK readers as well as HID, Mifare, and generic ID card readers
Connects with a variety of electric locks, sensors, exit buttons, alarm devices, and indicators
Can be integrated with other security systems such as CCTV, Intrusion Detection, Fire Alarm Release, and elevastor Control for total security system. Directly compatible with ZK’s biometric reader controllers.
Easy-to-use and intuitive programming with ZKAccess Software
System management by browser from client PC’s. No need to install software on each client
Programming of special logic between doors is set up with simple pull down menus. No special scripts or code is required.
Management software allows indication of real-time door status and remote commanding of door open/close state. Alarm conditions such as forced open and extended open alarms are reported.
Advanced access control capabilities are built into the hardware, including anti-passback, Dual and multi-Card Authentication, and Duress Mode.
Specifications
Model
inBIO460
CPU
32bit MIPS CPU
RAM
32M bits
Flash Memory
128M bits
Fingerprint Capacity
3000
Card Capacity
30,000
Event Buffer
100,000
SD card backup
Support
Power / Current
DC 9.6V-14.4V, Rated Max.1A
Wiegand Reader Port
4ea (26bit Wiegand, 8bit Burst for PIN)
RS485 Reader Port
1ea Extended RS485 Port
Communication
RS485, TCP/IP
Baud Rate
38,400bps (Recommended) / 9600bps, 19,200bps, 57,600bps (selectable)
Input Port
8ea (Exit Button#1,  Door Sensor#1; Exit Button#2,  Door Sensor#2; Exit Button#3,  Door Sensor#3; Exit Button#4,  Door Sensor#4)
Output Port
4ea (4 FORM-C Relay Output, SPDT 5A@36VDC/8A@30VAC)
4ea (4 Aux FORM-C Relay Output, SPDT 2A@30VDC)
LED Indicator
Yes, LED indication for communication, power, status and punch card
Operating Temperature
0°to +55°C
Operating Humidity
10% to 80% relative humidity non-condensing
Dimension (H*W*D)mm
226*106*36(Single board)
400*330*90.5(with power supply and metal cabinet)
Housing Material
PVC
Software
ZKAccess5.0