30ml KESTER 959T & 186 COMBO DROPPER TIP BOTTLES WITH PRECISE DRIP CONTROL TIP

Description

Since 2009 Dickie’s Garage Sale has been selling genuine Kester No Clean Flux here on eBay for everyday people like you that don’t need large gallons for your needs. We pride our selves in fair and honest business, reasonable prices and great customer service :) Thank you. Joe.
Check our other listing for more great deals :)
KESTER 186
No-Clean RMA Liquid
Soldering Flux
You get (1) 0.5oz / 15ml
Precise Drip Control Tip Bottle
(
manufactures technical data sheet included
)
&
KESTER 959T
Low- Solid No-Clean
Liquid Soldering Flux
You get  (1) 0.5
oz / 15ml
Precise Drip Control Tip Bottle
(
manufactures technical data sheet included
)
KESTER 186
• Great for repairs and solder touchup.
• (RoHS) compliant.
• healthy long lasting bond.
Performance Characteristics
:
• High thermal stability.
• Improves soldering performance Eliminates the need and expense of cleaning.
• Classified as ROL0 per J-STD-004 & J-STD-004B.
• 186 residues are non-conductive, non-corrosive and do not require removal in most applications.
• Eliminates the need and expense of cleaning.
• Residue coats the board protecting it from the elements.
• 2 Year shelf life.
Product info
Kester 186, under MIL-F-14256, was QPL approved as Type RMA. The flux residue after soldering is non-corrosive and non-conductive. 186 rosin flux has been developed for use in critical applications where difficult assemblies are to be soldered, but process requirements stipulate use of Type RMA flux. This flux possess high thermal stability for soldering multi-layer assemblies which may require a high preheat temperature or longer temperature dwell time. There is no surface insulation resistance degradation caused by the flux residue. The use of a minimum of ionic activating agents and the inactive nature of the residue permits leaving the residue on circuit board assemblies for many applications. The flux residue is also moisture and fungus resistant.
KESTER 959T
Not For General Soldering Iron Work on Wires & Such
Flux
Designed
For Advanced Soldering
With
Hot Air, Infrared  & Tiny Tipped Soldering Irons For Quick Touch Soldering
Of Gaming Systems - Computers - Cell Phones - Solar Cells.
Any Advanced Soldering Work.
• Alcohol based for a very clean job.
• Great for repairs and solder touchup.
• Dries as its heated coating the solder.
• (RoHS) compliant.
• Leaves a clean white residue that doesn’t require cleaning.
• healthy long lasting bond.
Performance Characteristics
:
• Minimize micro-solderballs
• Extremely shiny joints
• No streaky, white residues
• Improves soldering performance
• Eliminates the need and expense of cleaning
• Classified as ORL0 per J-STD-004
• Compliant to Bellcore GR-78
• 3 Year shelf life
Product info
Kester 959T is a no-clean, non-corrosive, liquid flux that is designed for the wave soldering of conventional and surface mount circuit board assemblies. 959T was developed to minimize the formation of micro-solder balls during wave soldering operations. This flux contains a small percentage of rosin (0.5%), which improves solder-ability, heat stability and surface insulation resistance. 959T offers the best wetting and the shiniest solder joints of any no-clean, solvent- based chemistry. It is a very good flux that can be used for secondary soldering such as touch up and repair. 959T leaves evenly distributed residues for the best cosmetic appearance.
Photo of current Kester bottle in use available upon request :)
(LOT#, DOM, DOE)
Always buy with confidence from
Dickie's Garage Sale :)